Skip to content
DIY-Zone
Instagram
  • Svenska
Menu Close
  • Svenska
You are currently viewing Larger knobs for bed leveling

Larger knobs for bed leveling

Larger knobs for the adjusting screws makes it a lot easier to adjusting the height of the bed.

Manufactured / printed parts:
  • https://www.thingiverse.com/thing:2165694

You Might Also Like

Read more about the article Cooling fans

Cooling fans

Read more about the article Oldham coupler

Oldham coupler

Read more about the article Z-axis Ball screw

Z-axis Ball screw

Leave a Reply Cancel reply

Categories

Recent Posts

  • Z-axis Ball screw
  • Belt tensioner for x & y axis
  • Oldham coupler
  • Z leadscrew
  • Larger knobs for bed leveling

Affiliate links

This page contains some Affiliate links which means that I get a small percentage compensation on the articles you buy through the links that are on my site, it does not affect your price on the article but it helps me with the cost of keeping this page live.

If a link no longer works, feel free to let me know so I can find an alternative product.

Instagram

The first print from my restored HE3d H500 was a request from my better half. Merry christmas to you all. #he3dprinter #he3dh500 #he3d #3dprinter #3dprinters #birdfeeder
_diyzone_
_diyzone_
•
Follow
The first print from my restored HE3d H500 was a request from my better half. Merry christmas to you all. #he3dprinter #he3dh500 #he3d #3dprinter #3dprinters #birdfeeder
4 years ago
View on Instagram |
1/7
The first test cube with my new x-carrier is done, and so far it looks really promising. so now it's time to start fine tuning.🤔🪛🔧
The first test cube with my new x-carrier is done, and so far it looks really promising. so now it's time to start fine tuning.🤔🪛🔧
The first test cube with my new x-carrier is done, and so far it looks really promising. so now it's time to start fine tuning.🤔🪛🔧
_diyzone_
_diyzone_
•
Follow
The first test cube with my new x-carrier is done, and so far it looks really promising. so now it's time to start fine tuning.🤔🪛🔧
4 years ago
View on Instagram |
2/7
An friend texted me and asked if i like to have an other 3d printer, and who am I to say no to that.😉 There is a lot to do with the printer and I have been searching high and low for information about it without success. So if anyone have information about a HE3D H500 please let me know. #he3d #he3dh500 #3dprinter #3dprinterrepairs
_diyzone_
_diyzone_
•
Follow
An friend texted me and asked if i like to have an other 3d printer, and who am I to say no to that.😉 There is a lot to do with the printer and I have been searching high and low for information about it without success. So if anyone have information about a HE3D H500 please let me know. #he3d #he3dh500 #3dprinter #3dprinterrepairs
4 years ago
View on Instagram |
3/7
The new x-carrier for my tevo tarantula is begin to take shape, all I have to do now is try to get the wiring in order and start printing the parts. #3dprinter #3dprinters #3dprintermods #3dprinterupgrade #3dprinterupgrades #tevotarantula #tevotarantula3dprinter
_diyzone_
_diyzone_
•
Follow
The new x-carrier for my tevo tarantula is begin to take shape, all I have to do now is try to get the wiring in order and start printing the parts. #3dprinter #3dprinters #3dprintermods #3dprinterupgrade #3dprinterupgrades #tevotarantula #tevotarantula3dprinter
4 years ago
View on Instagram |
4/7
I finally took the time and turned the printer 180 degrees by flip the y-axis and the heatbed to create more space for the x-carrier I am working on. I also took the opportunity to do a first test assambly of the carrier. www.diy-zone.com #3dprinter #tevotarantula #3dprintermods
I finally took the time and turned the printer 180 degrees by flip the y-axis and the heatbed to create more space for the x-carrier I am working on. I also took the opportunity to do a first test assambly of the carrier. www.diy-zone.com #3dprinter #tevotarantula #3dprintermods
_diyzone_
_diyzone_
•
Follow
I finally took the time and turned the printer 180 degrees by flip the y-axis and the heatbed to create more space for the x-carrier I am working on. I also took the opportunity to do a first test assambly of the carrier. www.diy-zone.com #3dprinter #tevotarantula #3dprintermods
4 years ago
View on Instagram |
5/7
I mounted ball screw on the z-axis, this is the result. For more info please visit my website: www.diy-zone.com
I mounted ball screw on the z-axis, this is the result. For more info please visit my website: www.diy-zone.com
I mounted ball screw on the z-axis, this is the result. For more info please visit my website: www.diy-zone.com
_diyzone_
_diyzone_
•
Follow
I mounted ball screw on the z-axis, this is the result. For more info please visit my website: www.diy-zone.com
4 years ago
View on Instagram |
6/7
En liten leverans från amazon.de
_diyzone_
_diyzone_
•
Follow
En liten leverans från amazon.de
4 years ago
View on Instagram |
7/7
View on Instagram
Copyright 2020 - DIY-Zone

Den här hemsidan använder cookies. Genom att fortsätta använda sidan godkänner du vår användning av cookies.