Z-axis Ball screw
Edit: 2020-11-01 I found that the max in Z was about 194mm with this modification, but I will soon redraw the motor bracket so it's possible to get at least…
4 Comments
Belt tensioner for x & y axis
Another thing I recommend is the tensioners for the belts to the x & y axis, since I have access to a cnc router I did the part that holds…
Oldham coupler
An oldham clutch is primarily used to pick up the wobble in the z-screw, but another big benefit is that it disengages if the nozzle goes into the heat bed.…
Z leadscrew
One problem as I see it is that Tevo has chosen to hang the z-screw in the flexible coupler, in addition the engine bracket is quite neat which together gives…
Larger knobs for bed leveling
Larger knobs for the adjusting screws makes it a lot easier to adjusting the height of the bed.Manufactured / printed parts:https://www.thingiverse.com/thing:2165694
Spool holder
Another thing that I see as a must is some kind of holder for the filament, there are various holders to download that are made to attach to the printer's…
Cooling fans
After a bit of research, I realized that cooling fans should be one of the first upgrades, and the choice fell on this dual-fan solution that provides more cooling than…
Sluice box 10X60cm
A small sluice box that with its small dimensions and light weight is perfect for prospecting, recycling and clean up system. Components: In addition to what is listed below, a…
X-Y angle adjustment
1. Start by printing two pieces of triangles that you place according to the image.You can download the file here: https://www.thingiverse.com/thing:4636698 2. When printing is complete, place the pieces back…